Mostrando postagens com marcador Sharepoint2013. Mostrar todas as postagens
Mostrando postagens com marcador Sharepoint2013. Mostrar todas as postagens

domingo, 1 de dezembro de 2019

Destination Path Too Long Fix (when Moving/Copying a File)

If you are receiving an error Destination Path Too Long when trying to copy or move a file to a folder, try the quick trick below. The reason you are receiving the error is that File Explorer failed to copy/delete/rename any path-name longer than 256 characters.  The instructions below apply to Windows XP, Windows 7, Windows 8, Windows 10, Windows Server 2003, Windows Server 2008, and Windows Server 2012R2/2016/2019.
This is not the limitation of NTFS file system, but the Win32 API library. MAX_PATH value in Win32 API is 260. Most standard applications, including Windows Explorer (File Explorer), do not work correctly with files long paths exceeding 256 characters. Under the file name, Windows understands the entire path, starting with the root of the drive, ending with the last subfolder and the file name itself.
When using Unicode API functions, it is possible to use a path of up to 32767 characters. Thanks to this, many third-party programs (the popular file managers, for example FAR and Total Commander) process files/folders without any problems, the path length to which exceeds 256 characters.
Note. Some programs use the UNC file path format (prefixed with \\?\) to bypass the limitations of the Win32 API. For example, the absolute file path might look like this: \\?\C:\folder1\subfolder1\toolongfilename
Due to max path length limitations, the administrator may encounter the following problems:
  • Users can create files and folders in a shared network folder that the administrator (or management scripts) cannot access locally;
  • Errors when synchronizing roaming profiles;
  • Errors data recovery from shadow copies;
  • Incorrect calculation of the directories size;
  • Lost files during migration and data transfer between servers, etc.

Destination Path Too Long Fix

Full Error: “The file name(s) would be too long for the destination folder. You can shorten the file name and try again, or try a location that has a shorter path.”
Screenshot of Destination Path Too Long error on Windows Server 2008
destination path too long
Screenshot of Destination Path Too Long error on Windows 8:
the file name would be too long for the destination folder

Solution 1. Rename Parent Folder to Decrease the Full Path

The simplest way is to shorten the name of the parent folders, decreasing the total path length (but not always applicable) by simply renaming it.

Solution 2. Create a symbolic link

Another option is to create a symbolic link to a part of the path, thus shortening the total path length. To create a link you can use the following command:
mklink /d c:\home\link “C:\verylongpathhere……”
Next, perform file operations with the directory to which the symbolic link is assigned (c:\home\link in our case).

Solution 3. Use Subst utility

Another option is to associate the problem folder to a virtual disk (in our example, Z:), using the built-in utility Subst. Thus, you can also shorten the path length:
Subst Z: “C:\verylongpathhere……”
Now you can work with the data on the Z: drive, the path to the files in which will not exceed the Win32 API path limit. After your job is finished, you can delete the virtual disk using the Subst with the /d option:
Subst Z: /d

Solution 4. Hidden share path

Step 1

The quickest fix for this, especially if you are needing to simply migrate (move) a lot of folders from one place to another is to map a drive to the drilled down the folder.
What you should is browse to the hidden share path and copy it to your clipboard.
file name too long for destination folder

Step 2

Then browse to “Computer” or “My Computer” and click on Map Network Drive. Depending on your OS it might appear under the tools menu.
the file name is too long for the destination folder

Step 3

Then simply paste your long folder path and hit Finish.
the file names would be too long for the destination folder

Step 4

Now you will be able to copy the files/folders into this location without receiving the error.

Solution 5. How to Enable Long Path Support in Windows 10 (1607) and higher

In Windows 10 Anniversary Update (1607), it became possible to disable the MAX_PATH limit on the Windows operation system level without using prefix \\?\. By default, this feature is disabled.
To enable the built-in support for long paths in Windows 10/Windows Server 2016, you can use the Regedit.exe editor to set the LongPathsEnabled parameter of REG_DWORD in the registry key HKLM\SYSTEM\CurrentControlSet\Control\FileSystem with a value 1.
the file name(s) would be too long for the destination folder
You can change this registry parameter with the following PowerShell command:
Set-ItemProperty -Path HKLM:\SYSTEM\CurrentControlSet\Control\FileSystem -Name LongPathsEnabled -Value 1
Or you can enable long path support via Group Policy Editor (Win + R \ gpedit.msc) Computer Configuration > Administrative Templates > System > Filesystem. Enable the policy Enable NTFS long paths.
destination path too long windows 10
For the changes to take effect in both cases, the computer needs to be rebooted. After a reboot, users and programs will be able to work without restrictions with files, the length of the path to which exceeds 256 characters. Now the files will only be affected by the NTFS file system file path limit of 32767 characters.
However, in some applications, the MAX_PATH check is embedded in the code. About the max file path restrictions for .Net developers, see the Solution 7 below.

Solution 6. Using Robocopy Utility to Copy and Move Files

To copy or move data, you can use the built-in console Windows tool — robocopy. The robocopy utility allows you to correctly copy and synchronize files and directories with long paths.
For example, if you cannot delete the directory due to the path length limit, you can first move data from the directory using robocopy:
ROBOCOPY c:\folder1\folder2\folder3\longpath\ c:\tmp\ /MOVE /E
file name would be too long for the destination folder
After that, you can delete the source directory:
Delete c:\folder1\folder2\folder3\longpath /q /f

Solution 7. Long File Path for .Net Developers

The Base Class Library (BCL) of the development environment for the .Net Framework has a built-in preliminary check for the admissibility of long directory and file names. Therefore .Net Framework developers may encounter a System.IO.PathTooLongException error in their programs.
Check for path length removed from BCL code in .Net Framework 4.6.2. Therefore, developers after updating the version of .Net Framework can use long paths in the UNC path format (\\?\C:\Very_long_path) or when the LongPathsEnabled parameter is enabled in Windows 10/Windows Server 2016, it is possible to work with files with paths of almost any length correctly.
To do this, use Net Framework 4.6.2 (and newer) when building applications, or for older app versions (.Net 4.0), use the following application configuration file:
<?xml version=”1.0″ encoding=”utf-8″?>
<configuration>
<startup>
<supportedRuntime version=”v4.0″ sku=”.NETFramework,Version=v4.0″/>
</startup>
<runtime>
<AppContextSwitchOverrides value=”Switch.System.IO.UseLegacyPathHandling=false;Switch.System.IO.BlockLongPaths=false” />
</runtime>
</configuration>

Solution 8. Long File Path in PowerShell .Net Developers

Because PowerShell is based on .Net, in order for the Get-Item, Get-ChildItem, Remove-Item, etc. cmdlets to work correctly with long file paths, you need to upgrade the .NET Framework to 4.5 or newer and install Windows Management Framework 5.1.
Tip. The current version of PowerShell can be found in the variable $PSVersionTable.
After that, when using file cmdlets instead of Path, you need to use the LiteralPath parameter. For example:
Get-ChildItem -literalpath \?\C:\PS
the filename would be too long for the destination folder
Tip #1
There also is a great tool called “Long Path Tool” that works great to fix this: https://longpathtool.com/. However it isn’t free, the methods above are.
Tip #2
Thank you, Colin Albright, for the comment below. Yes, you can also use 7-zip or any zip utility to fix Destination Path Too Long problem. Sometimes on single files, this could be a better and faster solution. Just zip the folder up, and your good to go.

terça-feira, 23 de maio de 2017

Janela Modal Pop Up no Sharepoint 2013

1. Para construir uma janela pop up no Sharepoint 2013 utilizamos um código em Java Script como o abaixo. O arquivo chama-se (SP15ModalDialog.js) e está em anexo nesse post. SP15ModalDialog.zip Também pode ser baixado aqui.
 

2. Para termos o modal pop up não é necessário alterar esse código. Aqui temos algumas explicações sobre ele:



  • Função OpenInDialog:
    Esta função será chamada em você links (onClick) ou botões (OnClientClick). E leva os seguintes parâmetros:
    • dlgWidth: largura de diálogo (ex: 600)
    • dlgHeight: altura de diálogo (ex: 800)
    • dlgAllowMaximize: Show botão de maximizar Dialog (verdadeiro ou falso)
    • dlgShowClose: Show botão fechar em Dialog (verdadeiro ou falso)
    • needCallbackFunction: determinar se você quiser registrar chamar de volta função ou não para o Diálogo (verdadeiro ou falso)
    • PAGEURL: o URL da página de destino ou local
  • Função CloseDialogCallback:
    Esta função contém a lógica do trabalho a ser feito depois de fechar, salvar ou cancelar a caixa de diálogo, a idéia principal aqui é se você abrir um formulário no diálogo e gravar dados, é necessário atualizar a página pai para ver as alterações que é feito . ele contém três condições
    • Se o usuário clicar no botão OK ou salvar - se (DialogResult == SP.UI.DialogResult.OK):
      Ele irá atualizar a página pai (se needCallbackFunction é verdade)
    • Se o usuário clicar no botão CANCEL ou CLOSE - else if (DialogResult == SP.UI.DialogResult.cancel)
      Não fazer nada ou adicionar seu código personalizado
    • Se DialogResult retornar outro valor - mais: Não fazer nada ou adicionar seu código personalizado.
Como usá-lo
1. Publique o arquivo JavaScript na biblioteca de estilos. Para isso vá até o icone de configurações, selecione > Conteúdo do site.
 
 
 
 
2. Em conteúdo do site, clique em Biblioteca de Estilos.
 
3. Procure colocar o arquivo dentro de uma pasta chamada "js".
 

4. Assim que estiver na pasta "js" clique em Arquivo > Carregar Documento ou araste e solte ele na pasta.

 
5. Certifique-se de ter dado check-in e publicado uma versão principal do arquivo.
 


6. Você pode usar o SharePoint Designer 2013 para carregar arquivos para Biblioteca de Estilos (copiar e colar ou usar o botão Importar Arquivos).

 

7. Agora é necessário registrar o JavaScript na página em que terá o modal pop up. Para isso é necessário clicar com botão direito do mouse em 'Editar arquivo em Modo Avançado' no SharePoint Designer 2013.
 
8. Opte por 'Editar Layout de Página'.

 
 9. Já dentro da página coloque o seguinte código, conforme imagem que segue. Esse código faz referencia ao JavaScrip salvo na biblioteca de estilos.
​<script type="text/javascript" src="../../Style Library/js/SP15ModalDialog.js"></script>

 


10. Salve e feche a alteração na página.
11. Agora acesse a página em que deseja colocar o modal pop up insira uma Web Part do tipo Editor de Scripts.
 


12. Coloque o seguinte código dentro do editor da Web Part e clique em inserir. Esse código chama a função JavaScript que colocamos na biblioteca de estilos e atribui ela os devidos parâmetros. O último parâmetro é a URL que desejamos abrir no modal pop up. Essa URL pode ser local ou externa.
​<body onload="openInDialog(500,600,true,true,false,'http://www.SharePoint.com');"

 


13. Faça Check in da página e publique-a.
Remover o recurso do Modal Pop Up
Para isso exclua a Web Part de Editor de Scripts que foi adcionada.

Executar JavaScript ao carregar a página/documento


A diferença do que foi ensinado no link de Créditos ao final dessa página e essa Web Part foi que ao invés de colocar um link na página para o usuário clicar troquei a forma em que executo a função JavaScript (http://www.forumweb.com.br/dica/255/javascript/executar-javascript-ao-carregar-a-pagina-documento).
Às vezes é necessário executar uma função javascript assim que a página carrega, e temos várias opções para fazer isto:
<body onload="minhaFuncao();">

segunda-feira, 22 de maio de 2017

Configuração Integração Banco de Dados SQL Server com o OpenFire Spark

Driver:                                                 net.sourceforge.jtds.jdbc.Driver
Url do driver:                                    jdbc:jtds:sqlserver://SHAREPOINT2013:1433/openfire;user=openfire;password=@openfire#31;instance=SHAREPOINT

Problema de Sincronização Perfil de Usuario - Sharepoint 2013

  1. ​​​Primeiro voce deve verificar se o serviço Serviço de Sincronização de Perfis de Usuário
  2. ​​O tipo de sincronização deve ser pelo Sharepoint e não o Active Directory
  3. Pronto, iniciar a sincronização.

Preencher E-mail Usuario - Perfil do Usuario no Sharepoint Designer


Criar Fluxo Utilizando Perfil de Usuario


Erro autenticação no intravertex.com.br dentro do escritorio

Basta inserir o IP 189.112.225.181 no proxy transparente

Como configurar Servidor SMTP para o Sharepoint

Clique Aqui

Janela Modal Pop Up no Sharepoint 2013

1. Para construir uma janela pop up no Sharepoint 2013 utilizamos um código em Java Script como o abaixo. O arquivo chama-se (SP15ModalDialog.js) e está em anexo nesse post. SP15ModalDialog.zip Também pode ser baixado aqui.
 

2. Para termos o modal pop up não é necessário alterar esse código. Aqui temos algumas explicações sobre ele:



  • Função OpenInDialog:
    Esta função será chamada em você links (onClick) ou botões (OnClientClick). E leva os seguintes parâmetros:
    • dlgWidth: largura de diálogo (ex: 600)
    • dlgHeight: altura de diálogo (ex: 800)
    • dlgAllowMaximize: Show botão de maximizar Dialog (verdadeiro ou falso)
    • dlgShowClose: Show botão fechar em Dialog (verdadeiro ou falso)
    • needCallbackFunction: determinar se você quiser registrar chamar de volta função ou não para o Diálogo (verdadeiro ou falso)
    • PAGEURL: o URL da página de destino ou local
  • Função CloseDialogCallback:
    Esta função contém a lógica do trabalho a ser feito depois de fechar, salvar ou cancelar a caixa de diálogo, a idéia principal aqui é se você abrir um formulário no diálogo e gravar dados, é necessário atualizar a página pai para ver as alterações que é feito . ele contém três condições
    • Se o usuário clicar no botão OK ou salvar - se (DialogResult == SP.UI.DialogResult.OK):
      Ele irá atualizar a página pai (se needCallbackFunction é verdade)
    • Se o usuário clicar no botão CANCEL ou CLOSE - else if (DialogResult == SP.UI.DialogResult.cancel)
      Não fazer nada ou adicionar seu código personalizado
    • Se DialogResult retornar outro valor - mais: Não fazer nada ou adicionar seu código personalizado.
Como usá-lo
1. Publique o arquivo JavaScript na biblioteca de estilos. Para isso vá até o icone de configurações, selecione > Conteúdo do site.
 
 
 
 
2. Em conteúdo do site, clique em Biblioteca de Estilos.
 
3. Procure colocar o arquivo dentro de uma pasta chamada "js".
 

4. Assim que estiver na pasta "js" clique em Arquivo > Carregar Documento ou araste e solte ele na pasta.

 
5. Certifique-se de ter dado check-in e publicado uma versão principal do arquivo.
 


6. Você pode usar o SharePoint Designer 2013 para carregar arquivos para Biblioteca de Estilos (copiar e colar ou usar o botão Importar Arquivos).

 

7. Agora é necessário registrar o JavaScript na página em que terá o modal pop up. Para isso é necessário clicar com botão direito do mouse em 'Editar arquivo em Modo Avançado' no SharePoint Designer 2013.
 
8. Opte por 'Editar Layout de Página'.

 
 9. Já dentro da página coloque o seguinte código, conforme imagem que segue. Esse código faz referencia ao JavaScrip salvo na biblioteca de estilos.
​<script type="text/javascript" src="../../Style Library/js/SP15ModalDialog.js"></script>

 


10. Salve e feche a alteração na página.
11. Agora acesse a página em que deseja colocar o modal pop up insira uma Web Part do tipo Editor de Scripts.
 


12. Coloque o seguinte código dentro do editor da Web Part e clique em inserir. Esse código chama a função JavaScript que colocamos na biblioteca de estilos e atribui ela os devidos parâmetros. O último parâmetro é a URL que desejamos abrir no modal pop up. Essa URL pode ser local ou externa.
​<body onload="openInDialog(500,600,true,true,false,'http://www.SharePoint.com');"

 


13. Faça Check in da página e publique-a.
Remover o recurso do Modal Pop Up
Para isso exclua a Web Part de Editor de Scripts que foi adcionada.

Executar JavaScript ao carregar a página/documento


A diferença do que foi ensinado no link de Créditos ao final dessa página e essa Web Part foi que ao invés de colocar um link na página para o usuário clicar troquei a forma em que executo a função JavaScript (http://www.forumweb.com.br/dica/255/javascript/executar-javascript-ao-carregar-a-pagina-documento).
Às vezes é necessário executar uma função javascript assim que a página carrega, e temos várias opções para fazer isto:
<body onload="minhaFuncao();">

401 UNAUTHORIZED

Para solucionar:
Ir em "Gerenciar Recursos"
​Desabilitar Minimal Download Estrategy

quarta-feira, 29 de março de 2017

O Serviço de Controle de Sessão do Microsoft SharePoint Server pode estar configurado incorretamente. Para obter mais informações, contate o administrador do servidor.

“Não é possível renderizar o formulário. O Serviço de Controle de Sessão do Microsoft SharePoint Server pode estar configurado incorretamente. Para obter mais informações, contate o administrador do servidor.”
Ou
“The form cannot be rendered. This may be due to a misconfiguration of the Microsoft SharePoint Server State Service. For more information, contact your server administrator”
Possíveis Causas:
1 – O “State Service” não está iniciado/Configurado
2 – O “State Service” não está vinculado ao Web Application em que o seu site está.
Solução para Causa 1:
Abra o SharePoint Management Shell (Power Shell): Iniciar – Executar – Shell de Gerenciamento do SharePoint 2010
Execute as seguintes linhas:
1
2
3
$serviceApp = New-SPStateServiceApplication -Name "State Service"
New-SPStateServiceDatabase -Name "StateServiceDatabase" -ServiceApplication $serviceApp
New-SPStateServiceApplicationProxy -Name "State Service" -ServiceApplication $serviceApp -DefaultProxyGroup
Pronto, agora o State Service está Ok.
Observações:
Se você receber alguma mensagem de erro do tipo “O nome state service não é um nome único”, é porque provavelmente você já tem um “State Service” configurado, porém o mesmo não está associado a sua web application. Nesse caso, execute o procedimento de solução para a causa 2.
Solução para Causa 2:
  1. Acesse a Central Administration do SharePoint.
  2. Acesse o link “Application Management”
  3. E em seguida “Service Application Associations”
  4. Clique no nome da WebApplication da sua aplicação.
  5. Marque a checkbox “State Service”
Pronto, agora a sua webapplication utiliza o “State Service” e o formulário será renderizado normalmente.
Fontes:

Como mover senhas e favoritos entre Microsoft Edge Chromium

  Press  Win + R  keys to open up the  Run  dialog box. Type  %LocalAppData%\Microsoft\Edge\User Data  and press  enter . Move the  Default ...